Noisy Garage Door Bothering You? 5 Expert Tips

Noisy Garage Doors: What Garage Door Repair Los Angeles Experts Say

Whether you have an attached or detached garage area, your garage door is a big part of the overall look of the entire home. But it can be a problem if it starts to become a noisy garage door. It’s going to be a bother for the whole family, not to mention to your neighborhood! You’ll ultimately need a garage door repair Los Angeles team to take care of things.

Of course, we know that hearing the garage door operate is a useful signal (in case someone from the outside might try to enter without your knowledge). However, most homeowners can do without the extra rackets and squeaks. And with years of constant use – about two or more times a day – you’ll inevitably come across noise issues in the long run. 

Here are our expert garage door fix tips to make sure your garage door opens and shuts smoothly:

Tighten the Nuts and Bolts

Your noisy garage door might be due to some loose nuts and screws. It’s inevitable because the entire garage door mechanism –  especially the spring tube and its bolt heads constantly vibrate and rattle on each other every time you operate the garage door.

If you have a basic toolset at home, like a square head or 8-point socket wrench, you can do periodic tightening of the bolts. However, take care not to over do it. Make sure the bolts are snug but not too tight. If you over-tighten the bolts and screws, you could risk affecting the mechanics and pulling the bolt heads through the garage doors.

As always, take safety precautions before doing any maintenance work. Even something as simple as nuts and bolts tightening could lead to an accident if you don’t know what you’re doing!

If you’re not well versed with home repairs, DO NOT attempt to adjust the track bolts and screws by yourself. Let garage door repair Los Angeles technicians handle the matter because the track carries the springs loaded with high tension. This can cause severe and even fatal injury if attempted by a novice! So a big no-no for DIYers.

Spray Some Lubricant

The whole garage door unit is composed of moving parts that will inevitably clash with each other as the unit gets older. And if you don’t do anything this, the hinges and all connecting parts will wear much faster.

Get a good lubricant (either lithium-based or silicone-based) that can be sprayed on the moving parts. Make sure to spray on the inside of each track, on the hinges in between the panels, on the springs, if they are exposed, and around the metal rollers.

If you have a chain drive, you can spray the chain assembly. But be careful not to put any lubricant if you have a belt drive.

Again, any moving part can cause rackets and vibrations. So spray liberally on these parts, and wipe off any excess that drips down using a cloth. If you do this at least twice a year, you could avoid any unnecessary loud garage door noise from bothering your family and neighbors.

Refer to the manual what type of lubricant your unit specifies. And if lubricating the metal parts does not subside the noise, it may be time to call a professional garage door maintenance team to inspect and repair the garage door.

Choose nylon Rollers

Again, depending on the type of rollers you have on your unit, metal rollers will contribute to that squeaking noise when they move along metal tracks. You may already need to replace the roller with a smoother option, like a nylon roller. It will cost more, but it will require less upkeep in the long term.

Nylon rollers are much quieter, and they won’t require the periodic lubrication that metal rollers need. It does cost more, but not too far from the cost of metal rollers. If you are replacing your rollers, replace all of them at once. A standard-sized garage door, for instance, will need about a dozen rollers.

While those with DIY experience can install the new rollers, it’s always better to do it with the help of professional garage door repair Los Angeles techs. They have the tools and know-how to complete the job safely in only a couple of hours.

Replace the Insulation Strip

Hear a loud, banging noise whenever you close the garage door? You may need to replace the insulation strip. This is the stuff underneath that helps keep your garage area warmer.

If the insulation strip is threadbare or is missing for some reason, you may feel colder coming into the garage. And, of course, without the rubber insulation, the door might come down banging each time you close the door.

If you’re replacing the strip on your own, get at least 16 feet of the strip at your local garage door supplies store. When you fit the new one onto the tracks, make sure not to cut too short. It’s better to adjust it later than cut the strip too short. And keep in mind that rubber insulations tends to shrink, so leave a few inches of width for allowance.

Check the Garage Door Opener

If your garage door hinges and springs are adequately maintained, maybe the garage door opener is your problem. Check if the noisy garage door rings loudest at the opener – near the roof of the garage. If that’s the case, have it checked by a professional garage door maintenance team.

If the mechanism is a bit loose, it can cause bumpy, erratic movements and those loud sounds. Contact a trained garage door maintenance team. They usually asses the opener before making any fixes.

Noisy Doors Need Expert Garage Door Repair Los Angeles

The best part about letting professionals deal with your loud garage door? They can thoroughly inspect the parts of the entire garage door unit and then work out the right solution. We at Titan Garage Doors and Products can assist you with any noise concerns on your garage door. We are a top garage door supplier in Los Angeles, and out team can help out with any replacement or repair project. Talk to us today – and worry more about the banging and clunking sounds every time you open or close the garage door!